Here is a list of one hundred

1. Heater

Generally in the case of low temperature, heat the air to start the engine. The engine does not need an air heater during normal operation
It is used when starting in a low temperature environment, which can increase the intake temperature of the engine and make it easier for the fuel to catch fire in the cylinder.

https://wdpart.com/


2.Thermostat assembly


The thermostat is a valve that controls the flow path of the coolant and is an automatic temperature control device, usually containing a temperature sensing component. The thermostat must be kept in good technical condition, otherwise it will seriously affect the normal operation of the engine.

3.Main oil passage pressure limiting valve
A component that prevents the oil pressure in the main oil passage from exceeding a predetermined value.

4. Swing arm seat
Install parts for the rocker arm or rocker arm assembly.

5. Intake valve, exhaust valve
Intake valve: A valve that allows fresh air to enter the combustion chamber of an engine
Exhaust valve: A valve that allows combustion to pass through when it leaves the cylinder

6.Crankshaft flange


It has a connecting effect on the wheel, which can not only achieve the accurate positioning and power transmission of the center of the wheel and the half shaft, but also facilitate the fixing of the brake disc and the disassembly of the wheel.

7. Spindle tile (upper and lower tile)
Upper tile: the part between the main bearing cover and the spindle neck
Lower tile: the part between the main bearing of the body and the main journal.

8. Flywheels
The main function of the flywheel is to store the energy of the working stroke, overcome the resistance of the auxiliary stroke to maintain the uniformity of the crankshaft rotation, and make the internal combustion engine work smoothly.

9. Heat exchanger
A device that can transfer part of the energy of the hot fluid to the cold fluid, and circulates the internal and external cooling media.

10. Fuel filter assembly
Its role is to make the diesel oil get fine filtration to prevent the impurities in the diesel dirt and other wear corrosion of many precision parts in the oil supply.

Continuing from the above, we now have 20 parts, the rest will be covered in future articles.